Nasson Pressure + Compressor

[ten3brousone]

just to confirm what i read, would anyone mind telling me if the default code will automatically turn off the compressor or do i need to manually go in and programm it to something similar to this:

http://www.chiefdelphi.com/forums/showthread.php?t=17802&highlight=nason

thanks for the help guys

[phillutz]

the default code has a line that changes the state of the digital18 based on the value of relay8 (i think it was 18 and 8)

relay_08_fwd != rc_dig_in18;

if memory serves.

Phil

[ten3brousone]

alright thanks, meaning that i dont have to code anything else. but then we would have to plug in the relay to that port? (sorry only half knowledgable in electronics, this is my first year and they made me programmer but i seem to branch off into everything else half wittedly ^.^)

[phillutz]

you need to plug the compressor's spike relay into the specific port into the code (i believe it was 8) and the nasson switch to the digital pin specified in the code. use a pwm cable and ignore the center wire, it's not needed.

You really should search before you post as these answers are found in other posts.

Phil