View Full Version : pic: My Prom Date - MILDREAD 4
shyra1353
20-02-2005, 14:42
[cdm-description=photo]20235[/cdm-description]
phrontist
20-02-2005, 14:43
Okay, I'm really confused! This looks awesome, but how does it work? I take it you can hold a bunch of tetras?
shyra1353
20-02-2005, 14:46
It is like a forklift. The bottom half of the arm is on a slider where the square aluminum in the centre works on a pulley to raise it. (The piston in the back lowers the square to raise the arm). The second half of the arm is raised by another piston that is mounted to the slider giving us a total of almost 9 and a half feet of air. We can only hold one tetra at a time and pick it up as the top half of the arm raises. Then we drive up to the goal, raise the first half and then lower the second half to drop the tetra on to the goal.
In the back we have wings or blockers that will come down to increase our area to block other robots from stacking.
She's my prom date .. and shes beautiful ..
Rohan_DHS
20-02-2005, 15:06
nice bot...how long did it take you to design it? like phrontist said...its pretty confusing...
well, it was pretty much designed on the fly... our original design (except for the wings) was completly different.
There are less confusing pictures that Shyra could have chosen to have put up, but I don't know what was going through her mind... I don't even know if I want to...
Rohan_DHS
20-02-2005, 15:25
well, it was pretty much designed on the fly... our original design (except for the wings) was completly different.
There are less confusing pictures that Shyra could have chosen to have put up, but I don't know what was going through her mind... I don't even know if I want to...
nice....well, good job on the robot, and c u guys at the GTA Regional :)
good luck, and i hope u guys do well
nehalita
20-02-2005, 15:32
beautiful. i'm quite jealous, you mind sharing prom dates?
shyra1353
20-02-2005, 15:42
nice bot...how long did it take you to design it? like phrontist said...its pretty confusing...
it took us a while to finalize the design .. the wings were done in the first couple of weeks, but the arm you see wasn't designed until about a week ago. We had another arm but there was so much friction that the piston couldn't lift it from the point we wanted to get enough height.
ps - i dont know neha .. ill share her with you for prom for a t-shirt!
edit: in response to Kevin's comment below: the wings are made of PVC .. we figured if they are good enough for FIRST to use as game pieces .. they are good enough for us ... they are attached to aluminum on the robot though and that issue did come up, so the bar it is attached has reinforcements on it to prevent it from warping. we are going to test it by running one of the old robots in to it, hopefully later today
Kelvin Ng
20-02-2005, 15:42
wow nice. the wings are a really cool idea, but be warned they might be used against u. if a team pushes those wings, the torque might steer ur robot away from the goal and u guys might miss. and impacts might start bending the aluminum (given theyre made of aluminum) ur screws might get bent? not sure. im just being paranoid for u guys :)
Rohan_DHS
20-02-2005, 15:48
well, im guessing that ur arm works now w/o probs?
btw. good observation, kelvin lol
well, im guessing that ur arm works now w/o probs?
Well, we haven't actually testd the new design yet, aside from pulling it up with our hands...
we just tried to turn the electronics on and a speed controller started smoking...
Hopefully it works!
To Kevin below:Yes.. we actually have built an extra wing in case one gets too badly warped, and they are mounted easily accessable (you got the location right)
Kelvin Ng
20-02-2005, 15:55
well, im guessing that ur arm works now w/o probs?
btw. good observation, kelvin lol
haha thanks. umm...me and my team were first considering making a defensive robot that could unfold to around 12 feet in length. But considering the forces other robots can apply on the wings, it might stress the chassis too much (aluminum bends too much), it was a good thing we didnt go with it. I didn't influence the decision to go with a conservative design, but its still good we didnt make insane wings.
looking at mildread 4, those wings look like their secured on top of the plate above the gearboxes. then connected to the pneumatics. if anything happens, maybe its fixable?
Rohan_DHS
20-02-2005, 15:58
Well, we haven't actually testd the new design yet, aside from pulling it up with our hands...
we just tried to turn the electronics on and a speed controller started smoking...
Hopefully it works!
...speed controller, smoking...now that cant be good :S we're making sure to be extra careful to make sure that metal or water, etc doesn't get in the speed controllers...we were drilling and using a vaccum to clean the metal pieces off the robot so that it doesn't even accidentally go in.
We did all that too... It ended up being that it was wired backwards.
nehalita
20-02-2005, 17:38
but shyra, we don't have enough money this yr to get T-shirts x.x'
how about a hug and a bracelet?
=\...=D?
Eugenia Gabrielov
20-02-2005, 17:56
Forget prom. Can I marry it Shyra?
Rohan_DHS
20-02-2005, 18:42
We did all that too... It ended up being that Shyra wired it backwards..
way to go Shyra....geez....j/k :p....its ok, every1 makes mistakes, i've prob screwed up on our bot more than ne1 else... o well...thats y we hav teachers...and my dad to tell me that im stupid... :(
Forget prom. Can I marry it Shyra?
wait...apparently same-sex marriage is 'legal' in Canada...wat about man/woman - to robot....im gonna hav to ask a lawyer about that...(sry, im pretty bored, and im pretty hyper, so i do/say stupid things when im hyper...well, i do even when im not hyper :yikes: :rolleyes: )
nehalita
20-02-2005, 18:59
Forget prom. Can I marry it Shyra?
just make sure the robot doesn't CHEAT on you with ME :yikes:
Rohan_DHS
20-02-2005, 19:30
just make sure the robot doesn't CHEAT on you with ME :yikes:
wow...yea...now this is gettin kinda creepy lol
Goobergunch
20-02-2005, 20:07
How did you get your school to let you have a robot as your prom date? I've been trying to get my school to allow robots as dates, but to no avail.
nehalita
20-02-2005, 20:16
don't worry rohan, i'm already married to my own bot. i swore i wouldn't cheat.
goobergunch - that's only IF they realize it's a robot =)
Rohan_DHS
20-02-2005, 22:46
lol, ok :p
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.