Log in

View Full Version : pic: 696 Circuit Breakers Complete!

sanddrag
24-02-2005, 20:56
[cdm-description=photo]20444[/cdm-description]
Max Lobovsky
24-02-2005, 20:57
Can you describe that interesting construction method you use for the arm and tower? Is it sheet riveted to angles to create tube? Why choose this (whatever it is) over stock tube?
sanddrag
24-02-2005, 21:05
The arm is made from either .040 or .050 aluminum sheet (I forget which but it is incredibly thin) formed into C channels. Two C channels are placed over each other and "buttoned up" with aluminum rivets. Anyhow, it came out incredibly light and very strong. We did this because box tubing that large with that thin of a wall is just not available.

Each "joint" (http://www.chiefdelphi.com/forums/showthread.php?t=35286&highlight=big+teeth) is made from 1/2" aluminum plate, pocketed out to leave only 1/8" of thickness where material is not needed.
Katy
24-02-2005, 23:16
what motors do you have in the arm?
Jeff K.
24-02-2005, 23:30
The whole robot looks insanely cool. All the gearboxes you showed me look really nice on the robot now. Awesome chasis. I see you also have a mount for the camera. Is your robot able to track a tetra?
Mike Hendricks
25-02-2005, 00:40
Looking good. I love the 6 motor drivetrain.

Are your wheels 1 piece or 2 piece? That conveyor belt stuff works really good also :)
sanddrag
15-03-2005, 16:48
what motors do you have in the arm?
The "shoulder" or the arm is driven by a Van Door motor and the "elbow" is driven by a globe motor. The Globe motor is concealed inside the box of the arm. Each motor is geared down 20:1 with a worm reduction.
Are your wheels 1 piece or 2 piece? The wheels are one piece machined from solid blanks of 6" diameter 2" thick 6061-T6 aluminum. Next year we may go to a two piece clamping wheel so we don't have to put so many screws in the tread to keep it on.
george56
16-03-2005, 10:38
The "shoulder" or the arm is driven by a Van Door motor and the "elbow" is driven by a globe motor. Each motor is geared down 20:1 with a worm reduction.


Now i see what that huge gear (http://www.chiefdelphi.com/forums/showthread.php?p=355129#post355129) was for! thats pretty cool!