Log in

View Full Version : [OCCRA]: Motor shaft modification

Alex Golec
11-10-2005, 19:41
Can the shaft of the keyang integrated motor be drilled with a small diameter hole to allow a shaft to be pinned directly to it?
Mike Martus
12-10-2005, 21:39
Can the shaft of the keyang integrated motor be drilled with a small diameter hole to allow a shaft to be pinned directly to it?

Official answer:
In the past we have allowed the shafts to be coupled and cut if needed. Drilling is also acceptable.

Reminder if you damage it beyond use you will need to purchase a new one.

We have a limited supply.