CIM Spec Sheets

[jakey]

Hey our team cant find the speck sheets for the CIM Motors. Can anyone help us out? we really need to know the RPM (no load) of the motors....please if anyone has teh speck sheets please help! thank you

[jonathan lall]

Well there's information (including the CIM's spec sheet) provided by FIRST here (http://www.usfirst.org/robotics/2006/2006specsheets.htm), and additionally the small CIM motors are well-documented on this forum. There was some noise early on that the 2006 CIM was different from the 2005 one, but that does not seem to be the case at all, the no-load RPM being around 5300. Whatever you're looking for in particular can probably be found with a search however. Good luck.

Edit: You might also be interested in this thread (http://www.chiefdelphi.com/forums/showthread.php?t=41255) for most of the discussion about what I'm describing.

[Arefin Bari]

There are 2 pages of discussion on the topic about all the motors. I would suggest you read through both pages. good luck.

http://www.chiefdelphi.com/forums/showthread.php?t=41255&page=1&pp=15&highlight=CIM+Specs

[RogerR]

spec sheets can be found here (http://www.usfirst.org/robotics/2006/2006specsheets.htm). the 'small' CIM has a free speed of 5310 RPM. spec sheet here (http://www2.usfirst.org/2005comp/Specs/CIM.pdf). the 'big' CIM has a free speed of ~2500 RPM, according to this (http://www2.usfirst.org/2006comp/Specs/CIM_Motor_FR801-005.pdf) spec sheet.

[jakey]

Thank you for your help! :D