corrupt CPU?

[Windward]

I am not sure, but I think I just corrupted my CPU (as far as I can tell). I was loading some code into the cpu (the code was in the process of loading) when the reset button on the CPU was pressed. Now it is permanently in the ready to be coded stage (programing light solid orange). I have tried disconnecting ALL power (main and backup), restarting IFI Loader, disconnecting the wires and reconnecting them but nothing seems to work. I am worried that I may have a corrupted CPU now.

[Dave Flowerday]

Try doing a full reset of the RC:

With main power applied, press and hold the Reset and Prog buttons at the same time. Release only the Reset, while continuing to hold the Prog until the Battery Power LED becomes solid green. Now release the Prog button. Now press and release the Reset button.

[Windward]

I am not sure, but I think I just corrupted my CPU (as far as I can tell). I was loading some code into the cpu (the code was in the process of loading) when the reset button on the CPU was pressed. Now it is permanently in the ready to be coded stage (programing light solid orange). I have tried disconnecting ALL power (main and backup), restarting IFI Loader, disconnecting the wires and reconnecting them but nothing seems to work. I am worried that I may have a corrupted CPU now.

Never Mind. After waiting 1/2 an hour, it went back to normal.

[Mike]

Never Mind. After waiting 1/2 an hour, it went back to normal.
Heh. Two quick little solutions to nearly all computer/electronical problems I've ever had.

1) Reboot.
2) Come back later.

Glad to see #2 worked :)