Old Breaker Panel

[vector023]

Can our team use the Breaker Panel (power Distribution Center) from last year? It's the all-in-one panel so that 40A and 20A and 30A can be at the same location. Thanks a lot!

[EricH]

Can our team use the Breaker Panel (power Distribution Center) from last year? It's the all-in-one panel so that 40A and 20A and 30A can be at the same location. Thanks a lot!You know, the rules are very useful--and so is search. Doing a search led me to a reference to the following:
<R54> The EX18-12 Battery, the Main 120 Amp Circuit Breaker, and the Circuit Breaker distribution panels must be connected as shown in the 2006 ( or optionally) as in the 2005 diagrams shown below. The EX18-12 Battery must use the Anderson Connector. The connector must be attached with either the copper SLU-35 lugs provided in the Terminal Supply Bag or appropriate crimp-on lug connectors. The Battery terminals and the connecting lugs must be insulated with shrink tubing and/or electrical tape. You may use additional lengths of #6 red and #6 black wire to reach the panels as needed to make the above connections. The circuit breakers must be readily accessible for inspection and testing at each competition event.
It's legal.

[Jon Jack]

I believe that the GDC clarified in Update #3 that teams can use the IFI Breaker in addition to or in replacement of the breakers provided in the this year.

[vector023]

Thank you very much guys!

[dude__hi]

The old breaker panel is legal and so much more useful than this year's although it can take more components than we use....