Log in

View Full Version : Can we use Hot Glue on the robot in any way??

Leo 1529
10-02-2006, 16:10
Can we use Hot Glue on the robot in any way??

is there a rule that says we cant??
DanTheRobotMan
10-02-2006, 16:13
What are you going to hot glue? :confused:
Leo 1529
10-02-2006, 16:13
What are you going to hot glue? :confused:

a plastic clover onto a servo motor...
Beth Sweet
10-02-2006, 16:16
Reference this thread (http://www.chiefdelphi.com/forums/showthread.php?t=43108&highlight=glue) for the glue discussion.

My advice would be to avoid glue on any essential robot parts because when the defense period comes along, well, glue isn't always the best under pressure, especially hot glue.
DanTheRobotMan
10-02-2006, 16:16
I think you can...but i'm not sure....double check on the rules under "The Robot."
Leo 1529
10-02-2006, 16:18
Reference this thread (http://www.chiefdelphi.com/forums/showthread.php?t=43108&highlight=glue) for the glue discussion.

My advice would be to avoid glue on any essential robot parts because when the defense period comes along, well, glue isn't always the best under pressure, especially hot glue.

alright thank you
Rick TYler
10-02-2006, 16:32
My advice would be to avoid glue on any essential robot parts because when the defense period comes along, well, glue isn't always the best under pressure, especially hot glue.

Hot melt glue available in the retail market is pretty sad stuff. I wouldn't use it for anything on a robot other than potting electronics.

On the other hand, the only reason to ever use mechanical fasteners is because you need to remove the part for maintenance, or because a suitable adhesive is not available. Screws, bolts and rivets are poor substitutes for the right glue.
Éowyn
10-02-2006, 17:11
Yes, you can, there is no rule against using hot glue.
Elgin Clock
10-02-2006, 17:16
I think we have used hot glue in the past to hold pwmo cables in their respective slots as a temporary fix.

I think it was hot glue.. I have no idea. lol Maybe it was caulk. :rolleyes:
KenWittlief
10-02-2006, 17:17
In any way?

In certain ways, but not in all ways!

For example, you cannot cover your tires with hot glue to get better traction...
sciguy125
10-02-2006, 17:24
We discovered that hot glue is a good way to hold the PWM cables (connectors rather) in place. It's strong enough to hold them in place, but weak enough that a screwdriver can pry it off.
lukevanoort
10-02-2006, 17:29
In any way?

In certain ways, but not in all ways!

For example, you cannot cover your tires with hot glue to get better traction...
But, you could use hot glue to help hold on other stuff for better traction. Actually, we experimented with this in my crusade to find the perfect attachment method. (The mentors want either: wire, carpet tacks, or zip ties) It isn't that stong though... maybe it could be used as ghetto Locktite? I wonder... Hmmm...