IR Switch Wiring [Archive]

sgsdragons

13-02-2006, 19:08

Can anybody give me some information on how to wire the revieving end of the IR sensors?

Alan Anderson

13-02-2006, 21:34

Wire it the way it's labeled on the side of the sensor. Ground the ground wire, put 12 volts (from your 20 amp "sensor power" circuit) on the power wire, and connect either the NC or NO output to a digital input on the Robot Controller.

Calvin

14-02-2006, 03:26

http://www.chiefdelphi.com/forums/showthread.php?t=43266