Log in

View Full Version : Invalid Address

team 803
19-02-2006, 13:44
I brought up the IFI Loader and tried to load up our hex file, but a message came up that said:

Invalid Address: 0x0 (correct Range: 0x800-0x7fff)

How do I fix this
TimeOut
19-02-2006, 13:54
What version of the IFI Loader are you using?

Sean

I brought up the IFI Loader and tried to load up our hex file, but a message came up that said:

Invalid Address: 0x0 (correct Range: 0x800-0x7fff)

How do I fix this
team 803
19-02-2006, 13:57
v-1-0-0
TimeOut
19-02-2006, 14:01
Uninstall 1.0.0 and install 1.1.0 (2 Feb 06)

http://www.ifirobotics.com/docs/ifi-loader-v1-1-0.zip

Post if it fixes your problem.

Sean

v-1-0-0
team 803
19-02-2006, 14:08
I still recieved an invalid address range error
TimeOut
19-02-2006, 14:12
Take a look at this thread:

http://www.chiefdelphi.com/forums/showthread.php?t=25662&highlight=Invalid+Address%3A+0x0+%28correct+Range% 3A+0x800-0x7fff%29

found this by searching for:
Invalid Address: 0x0 (correct Range: 0x800-0x7fff)

(search on the Orange bar above the ads)

(change the 18f8720.lkr with 18f8722.lkr - in the answer)

Sean
team 803
19-02-2006, 14:18
18f8722.lkr is the linker I have in it
TimeOut
19-02-2006, 14:23
Hmm, let's see. Maybe do a 'Clean' (Project, Clean in MPLab). Also, check to make sure the device in the Configure, Select Device is the 18F8722 processor.

Sean

18f8722.lkr is the linker I have in it
team 803
19-02-2006, 14:26
Yes I have that device selected, now, when I am exporting the hex, do I need to edit anything on the window that pops up? Program Memory Areas?
team 803
19-02-2006, 14:37
under the program memory checked box it has Start:0 End:0x1fffe
TimeOut
19-02-2006, 14:38
I don't think you need to do the export. Just do a build (F10 or CTRL-F10) and then grab the .hex file that is created. I've never had to do export to get a .hex file that will load.

Sean

Yes I have that device selected, now, when I am exporting the hex, do I need to edit anything on the window that pops up? Program Memory Areas?
team 803
19-02-2006, 14:42
Well, when I clicked build all, it didn't do anything.
TimeOut
19-02-2006, 14:42
It sounds like a configuration problem. Has it worked in the past?

Sean

Well, when I clicked build all, it didn't do anything.
team 803
19-02-2006, 14:45
It built when I was over at Bosch, but it hasn't worked since I brought it here.
team 803
19-02-2006, 15:09
So, I have the program all ready to go, but I can't download it to the robot.
team 803
19-02-2006, 15:40
Can anyone solve this?
TimeOut
19-02-2006, 21:43
I'm back.

Send me your project file. Let me see if I can see any problems.

Sean
sean@toltechs.com


So, I have the program all ready to go, but I can't download it to the robot.
Alan Anderson
20-02-2006, 10:33
Well, when I clicked build all, it didn't do anything.
That's not normal. Are you sure you opened the project (.mcp file) using the Open... command of the Project menu, and not just the individual source text files using the File menu?
Greg Ross
20-02-2006, 12:51
That's not normal. Are you sure you opened the project (.mcp file) using the Open... command of the Project menu, and not just the individual source text files using the File menu?
Could it be your output window is simply not visible. See if my post in this thread (http://www.chiefdelphi.com/forums/showthread.php?p=446675&highlight=output#post446675) helps.
team 803
21-02-2006, 08:09
E-mail is hard, since this is a school computer (curses websense :mad: ). When I tried to make/build, it froze for a sec, and did nothing.
team 803
21-02-2006, 09:10
E-mail is hard, since this is a school computer (curses websense :mad: ). When I tried to make/build, it froze for a sec, and did nothing.

K, used the teachers E-mail