Sponsors logos Question

[Nitroxextreme]

Some of our mentors were throwing around ideas about where to put Sponsors logos.

This year we had a lot of weight problems and hence had a lot of holes.

We decided that we would just put all of the sponsors logos on a thin piece of lexan and velcro it on.

Would this have to be on the robot when we weighed in even though its just for sponsors logos?

[Adam Richards]

Would this have to be on the robot when we weighed in even though its just for sponsors logos?Since it would be on during matches, yes. Non-functional decorations must fit within the weight limit, or else they could potentially become functional weight increasers.

[Rohith Surampudi]

we generally have metal plates made that contain the J&J name, and the rest of our high level sponsors have their names on the website. you need to work something out that will fit your needs, but Velcro doesn't seem like a good idea, i would see if i could get their names printed on vinyl stickers, and stuck to parts

[TD78]

What's wrong with Velcro? We have over 80 feet of it on our robot (http://www.joemenassa.com/Images/ROBOTICS2006/day43/pages/IMG_5523.html) this year! :D

In all honesty though, I think the your idea about attaching logos with lexan and velcro is a good idea. Just keep in mind, like mentioned above, that it is considered a part of your robot and must be on when at weigh in.

[Skolar]

We get stickers made and put them on our lexan shielding. the upper stuff that doesn't get contacted very often we use velcro for, but we rivet the lower stuff on that takes hits.

[ReaverOfSouls]

Our team has a lexan cube for a hopper, so all we did was put our sponsor logos on one of the sides. Since our robot is currently 2 pounds overweight, we cannot afford to add another sheet of lexan just for sponsors.
_________________________________________________

The eternal war rages on. Who will win? pirates or ninjas...

[Daniel_LaFleur]

We laminated sheets that had our sponsors logos on it, then we tie wraped them to the robot.

And, yes, they do count towards the weight limit :(

[DjAlamose]

What we do is we have laminated sheets with the sponsors, team logo, team number, schools, and all that good stuff all separate and then we Velcro them to the sides of the robot. This way, if they get ruined just slap on a new one. Plus they can get in the way when fixing the bot so they can be easily removed for that as well.

[dubious elise]

We laminated sheets that had our sponsors logos on it, then we tie wraped them to the robot.
We did the same. In past years, we have printed up address labels (the .75"-ish by 3"-ish ones) with our sponsors' names on them and stuck them to the frame or lexan. If they have a logo sticker and we have the space, we apply those as well.

[Eisner664]

What we usually do, is just put sponsor logos any where there is free space on the robot. Sponsors that give us more money get a better location than sponsors that give us less money. Last year we put the logos on the two side panels of the robot.

Team 1100 going all the way!!!