Inventor part needed

[CraigHickman]

Hey all-
I need an Inventor part, preferably as soon as possible.

The part I need is usually hosted on FirstCadLibrary, but the site seems to currently down. The part is the I-cylinder.

On a second note, if anyone happens to have a Inventor part of a 3/4 inch bore 3 inch stroke pneumatic from bimba, that would also be helpful.

You can email me at craigih@pacbell.net, or just PM me to a link of the part.

Thanks!

[Ed Sparks]

Hey all-
I need an Inventor part, preferably as soon as possible.

The part I need is usually hosted on FirstCadLibrary, but the site seems to currently down. The part is the I-cylinder.

On a second note, if anyone happens to have a Inventor part of a 3/4 inch bore 3 inch stroke pneumatic from bimba, that would also be helpful.

You can email me at craigih@pacbell.net, or just PM me to a link of the part.

Thanks!

The firstcadlibrary is back up (More problems with the IP). Sorry ..... :o

[CraigHickman]

Thanks a ton.
We ended up using the file which was hidden in the deep scary mass of one of our mentors computer.