Log in

View Full Version : Programing code

teh_pwnerer795
10-12-2006, 20:48
Hey i went to ifirobotics and tried to find the original code... cant seem to find it for 2006.... i basically need the code for the camera... for some reason i keep getting an error w/ stdio.h file .... i think it may be my complier but still not sure...
Tom Bottiglieri
10-12-2006, 20:57
Go to Project>Build Options>Project

Include Path - "C:\mcc18\h"
neilsonster
10-12-2006, 22:40
If you still need the camera code, it's here: http://www.kevin.org/frc/frc_camera.zip (see http://www.kevin.org/frc for other available code)
chris31
11-12-2006, 07:01
Th default code will be on IFI's site, but for the camera and other code you need to look for Kevin Watson's code. You can find his code at http://kevin.org/frc
teh_pwnerer795
11-12-2006, 19:46
Hm... i do have the project set to mcc18.... still getting that error... now that code from http://kevin.org/frc "the bells and whistles"....i have to include every piece of data (user_routines.c) into my own code? if yes just let me noe so i can start...:) i also see that there is a .mcp file in here... do i need to include that as well in the folder that al my code is in??
chris31
11-12-2006, 19:57
Read the readme that Kevin included with his code. It should tell you how to use his code in yours. If I recall all you have to do is make sure you have tracking.c, tracking.h, camera.c, and camera.h. Then make sure you #include the header files in your user_routine and then make sure you call all the camera initilization and tracking methods.
teh_pwnerer795
11-12-2006, 20:00
Read the readme that Kevin included with his code. It should tell you how to use his code in yours. If I recall all you have to do is make sure you have tracking.c, tracking.h, camera.c, and camera.h. Then make sure you #include the header files in your user_routine and then make sure you call all the camera initilization and tracking methods.

ok im somewhat majorly confused..... should i include all of the files found in the zipped file?? or should i only include tracking.c/.h and camera.c/.h? ... really confused im reading the 'read_me' and its telling me to delete this and add this..
teh_pwnerer795
11-12-2006, 20:03
I have found my problems:D:D

www.InnovationFirst.com
10/10/2005
- Added a checksum to the breaker panel packet
- now using <stdio.h>, compiler needs -nw=2066 to suppress warnings (under project->build options->project->MPLAB C18->Use Alternate Settings)
- Note: when using a 'printf' use a '\r' rather than a '\n' with the C18 compiler (v2.4 or later)

This is what has being failing on me:)
teh_pwnerer795
11-12-2006, 20:39
GUYS .. ima cry.. i do not have the 2.4v of C18... i have 2.2v but not 2.4:(:'( so this is probally the reason why i am getting the error....
chris31
12-12-2006, 06:59
GUYS .. ima cry.. i do not have the 2.4v of C18... i have 2.2v but not 2.4:(:'( so this is probally the reason why i am getting the error....

If I recall, v2.2 will not work. Only v2.4 will work.