CMUcam2 demo.llb for 2007 [Archive]

View Full Version : CMUcam2 demo.llb for 2007

Superschill

10-01-2007, 22:24

Where can we get the 2007 Labview software for the camera? We did not use a camera last year, and so don't have the Labview stuff from the 2006 season. The National Instruments ftp site for last year's software is (unsurprisingly) down. Can anyone let me in the loop? I've been looking hard basically since the Kickoff, and have had no luck - I just keep reading about old things.

Binome

11-01-2007, 02:14

sorry to hijack your thread, but I think this might be important too
I've been having problems getting labview to see any of my serial ports. I set the serial port in labview, but it gives me the general catch all error when it can't communicate with the camera. I think I may have forgot to install something when I installed labview. Any hints would be helpful

Here's the labview app thing
http://sine.ni.com/devzone/cda/epd/p/id/3422

Superschill

11-01-2007, 08:08

Thanks very much!

Lablabla

12-01-2007, 10:00

[QUOTE=Binome;553759]I think I may have forgot to install something when I installed labview. Any hints would be helpful
QUOTE]

It took me all last night till i found out why, I had the same problem
what you need to install, is the NI-VISA 4.0 (available to download from NI website, it's fairly large, but it's also on the Driver and Devices CDs we got in the kit, with the LabView CD (the other 3 CDs)