View Full Version : pic: Team 8 Graber
Daniel367
15-01-2007, 16:09
[cdm-description=photo]26272[/cdm-description]
Billfred
15-01-2007, 16:10
Looks like an interesting concept.
Do you have any provisions for protecting the Globe motor in the pipeline?
How do you intend to pick up a deflated tube?
astephen68
15-01-2007, 16:32
Does it close of Just spinnings the Donut thing in?
Jeff Rodriguez
15-01-2007, 16:41
http://www.chiefdelphi.com/forums/showthread.php?t=51657
Which one came first?
astephen68
15-01-2007, 16:44
Intresting I have a question for you are they just trying to only puy them on or are they trying to also remove the Spoilers and move them?
Daniel367
15-01-2007, 17:07
This is a reply to the posts so far.
No current thoughts about how to protect the motors.
The design allows for the jaw to change sizes but this was just to figure out how the motors would function.
the one at this address came first.
http://www.chiefdelphi.com/forums/sh...ad.php?t=51657
Design concept allows for a possibility of taking off ringers but not exactly sure if we will be doing that or just placing ringers.
RichardJames
15-01-2007, 17:08
Are you going to motorize the two outermost rollers seperately so you can rotate the tube while you're holding it?
astephen68
15-01-2007, 17:51
OK
Guy Davidson
15-01-2007, 17:55
Richard: yup, thos two will be motorized individually.
Hopefuly we'll be able to also remove spoilers.
Gabe: We're not sure. We might make some of it it adjustble if it seems that many tubes are deflated during regionals.
-Guy
astephen68
15-01-2007, 18:30
Yeah becaue i was wondering how you guys could get spoilers off like the dsign is good on putting the keepers on but removing spoilers.... but I think it could work.
Hey. . .That's pipe insulation! Way to be creative!:D
lukevanoort
15-01-2007, 20:02
How well does the foam material grip the inner tube?
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.