Solenoid Help

[Brigander]

How do I Program A Soleniod to work with a vacuum system? I need to be able to control the vacuum system with a button on the joystick and have no clue to go about starting this process.

[seanl]

you need to open up user routines.c
and go down to where it maps the relays to the joystick buttons. and change what ever you need to change. if you want to use the triggers i think relay 1 and 2 are mapped in the default code already. hope this was helpful.

[tdlrali]

Try easyC if you have a hard time programming with MPLAB. It will most likely make this much easier for you.