Log in

View Full Version : camera wire up

Armando
19-02-2007, 12:39
i need to know if the camera needs its own power source, or does it just connect to the robot controller.
tdlrali
19-02-2007, 12:53
It gets power from the RC
Armando
19-02-2007, 13:00
ok thanks. we didn't know and the camera is the last thing left to work on.
tdlrali
19-02-2007, 13:06
Good luck!

For more info, here is on all the pins on the camera:
http://www.ifirobotics.com/docs/cmu-cam2-reva-assembly.pdf
pheadxdll
22-02-2007, 08:59
It plugs into an unused PWM output on the RC which is powered by the backup battery so make sure its charged.