View Full Version : Shiping Robot
02-20-2007, 09:50 AM
:) What do we include when we pack robot? (just robot )? do we put controllers..? someone pleasE!
02-20-2007, 09:52 AM
1 Operator Console - all your joysticks, button boxes, fancy things that control your robot, the Operator Interface, and the board it sits on
2 KOP Batteries in their 'Original Packaging'
02-20-2007, 09:58 AM
Don't forget the mandatory labels for your battery box.
02-20-2007, 10:01 AM
02-20-2007, 10:22 AM
For the battery you must write "Non-Spilling Battery" in 1-inch or greater font on at least four sides of the wooden holder. Also, you must do the same thing to at least two sides of the cardboard box that the batteries came in. I just did ours a little bit ago. Warning: it is hard to fit text that tall in such a thin length if your box is anything like ours.
02-20-2007, 11:19 AM
For the battery you must...
...follow the directions in part 4.2 of the manual. The required wording is "NON-SPILLABLE BATTERY". The manual points to battery labels on the web. The provided labels go on all four facing sides of the crate, and on both exposed sides of the in-crate battery box.
But don't do anything just because you read it in a Chief Delphi forum post. Read the manual and do things because you read it there.
vBulletin® v3.6.4, Copyright ©2000-2018, Jelsoft Enterprises Ltd.