View Full Version : pic: Quixilver without ramps
Eugene Fang
20-04-2007, 00:23
[cdm-description=photo]28420[/cdm-description]
With 6" inch wheels and rebar weights...
Eugene Fang
20-04-2007, 20:49
With 6" inch wheels and rebar weights...
yes, exactly "rebar bot"
whytheheckme
20-04-2007, 20:53
Quixilver robot with its ramps taken off.
It looks so.... Naked!
I don't even think I've seen your bot with ramps.
I love the Rebar, though.
Might I ask why you went from the 4" wheels to the 6" wheels?
natalie604
20-04-2007, 22:07
the 6" wheels allowed us to drive up ramps much easier, and of course they increase our speed. =)
i believe we were going around 3fps in first gear and 10 or 11 with 4" wheels, and we had around .5" clearance off the ground but with the 6" wheels the robot got 1.5" clearance off the ground.
but we did save a little weight with the 4", and according to our driver it was a bit easier to drive.
PLUS THEY'RE SOO CUTE!!
Eugene Fang
21-04-2007, 00:44
I don't even think I've seen your bot with ramps.
ramp shown here
http://www.chiefdelphi.com/media/photos/28414?
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.