Log in

View Full Version : Question abut CMUCam2 Camera with VEX

yara92
14-09-2007, 08:49
Hello every one
I am a monitor for school young girls and boys, more than 40 days without success. I try to get the CMUCam2 Camera to work tracking and servoing
Please someone let me know how to do that, I get sum help from some friend's but the question that I am vary bad in electronics and programming.
I need if some one have experience can send me:
1. full information how to connect wire the camera using the VEX controller.
2. cod to make the camera find target green light. Cod using Eazy C.

This will help me to work with my team. Pleas I have no experience wit this I am mechanical engineering from the old school. But I wont to learn.
Yours
Mohamed - Israel
Mark McLeod
14-09-2007, 11:21
See if this helps you hookup the hardware.
http://www.chiefdelphi.com/forums/showpost.php?p=507128

What version of EasyC do you have?
yara92
16-09-2007, 14:19
See if this helps you hookup the hardware.
http://www.chiefdelphi.com/forums/showpost.php?p=507128

What version of EasyC do you have?

first of all thank you for reblay.
I have Version 2.7.0.2
Mark McLeod
16-09-2007, 16:20
I have Version 2.7.0.2

That sounds like the easyC for FRC version that was delivered in the 2006 Kit?

I don't have that version handy to directly help and I don't remember that it was compatible with Vex.

I'd suggest posting for help in the easyC sub-forum.
yara92
18-09-2007, 14:45
That sounds like the easyC for FRC version that was delivered in the 2006 Kit?

I don't have that version handy to directly help and I don't remember that it was compatible with Vex.

I'd suggest posting for help in the easyC sub-forum.
Hi Mark
the easyC version 1.1 I purchase from Israel
tanks any way
Mark McLeod
18-09-2007, 16:44
That version came before easyC was expanded to support the camera.

It's still possible, however, you'll need to depend on the code Kevin Watson wrote for the camera that I referenced in my other post.
It can either be imported into easyC or you can download MPLAB and use that with the compiler that easyC v1.1 came with.
yara92
19-09-2007, 11:23
That version came before easyC was expanded to support the camera.

It's still possible, however, you'll need to depend on the code Kevin Watson wrote for the camera that I referenced in my other post.
It can either be imported into easyC or you can download MPLAB and use that with the compiler that easyC v1.1 came with.

Hi Mark
I have the MPLAB Compiler from FRC 2007, I downlowd a file witch working between both controller FRC and VEX.
I will be glad if you can send me the cod.
Thanks
Yours
mohamed
yara92
22-09-2007, 08:19
See if this helps you hookup the hardware.
http://www.chiefdelphi.com/forums/showpost.php?p=507128

What version of EasyC do you have?


hi mark!
I have eazyC pro activate. My friend Jon team 236 helped me with hardware connection.
Can you help me to understand who to write cod to make the camera find target green light?
I am waiting for your answer if you have the time.
Mohamed team 1946