Taigene Motor Specs [Archive]

Guy_E

11-01-2008, 08:46

Hi
Does anybody know what the specifications of the Taigene motor are?
Torque, RPM and so on...
I haven't been able to find any. Has is not been published yet?

artdutra04

11-01-2008, 11:35

Hi
Does anybody know what the specifications of the Taigene motor are?
Torque, RPM and so on...
I haven't been able to find any. Has is not been published yet?Here's a link to a white paper with all the motor specs from 2006; there's a PDF in there for the Taigene (Van Door) motor.

http://www.chiefdelphi.com/media/papers/1895

Tristan Lall

11-01-2008, 12:49

Be aware that that isn't the exact same motor. It's probably a good starting point, but the model numbers are different. (They look like they're for the same application, though.)

Guy_E

11-01-2008, 14:42

So how can I found it out? Will it be published later in the build season?

emusteve

11-01-2008, 15:43

We pulled out the 2005 motor for comparison, and found it ran a considerably different speed. So to start, we measured this years motor at 46RPM unloaded. Got the same results both directions. No word on torq yet.

Steve

colin340

11-01-2008, 17:01

the old one were 94 rpms

DGrohnke1023

11-01-2008, 18:21

After contacting Taigene we recieved the spreadsheet in the link below.
Free speed was not provided but determined experimentally.
Note that Taigene's specs are at 8 volts while free speed is at 12.

http://www.chiefdelphi.com/media/papers/2064

gail

21-01-2008, 03:25

Do you have a phone number for them? I need to buy some spares.