pic: 973 teaser #2 [Archive]

AdamHeard

11-01-2008, 14:40

[cdm-description=photo]29561[/cdm-description]

Aren_Hill

11-01-2008, 14:42

hmm assuming this is the same partish area as your other teaser then that would be a wheel...but i dont think its that. but why the wheel? and i assume your lifting the ball over? hence the big sprocket and arm or just using that as a bumping device

AdamHeard

11-01-2008, 14:44

hmm assuming this is the same partish area as your other teaser then that would be a wheel...but i dont think its that. but why the wheel?

The other teaser is not the same part. However, together they are our manipulator.

Let's just say I brought something from Southern California with me when I moved up North.

Aren_Hill

11-01-2008, 14:47

hmm did you bring back the beachbot style arm? and with a globe powering part of you manipulator im assuming rollers to grab it.

if that arms lifting the ball its gotta be beefy i got no size reference though...

EricH

11-01-2008, 14:52

Imitation is the sincerest form of flattery...:D

Team2339

11-01-2008, 15:00

I hope this is a viable manipulator arm, because it is what we are building as well. Does anyone see any issues with the van motor driving the arm?

Still don't get the wheel part.:confused:

Cory

11-01-2008, 15:57

Can you say inspiration?

Yes, in this case it spells B-E-A-C-H-B-O-T ;)

Scott Morgan

11-01-2008, 17:34

I hope this is a viable manipulator arm, because it is what we are building as well. Does anyone see any issues with the van motor driving the arm?

Still don't get the wheel part.:confused:
In 2005 we used a vad door motor and a winch to drive our arm and were able to lift 36 lbs with it no problem. The only issue was that it was rather slow after the reduction. You could use a smaller reduction to get more speed out of it.

Dan Richardson

11-01-2008, 17:41

I guess I can't see the rest of your bot but if its what I think it is we just had to scrap a similar design because of rule R16, just a thought.

AdamHeard

11-01-2008, 17:58

I guess I can't see the rest of your bot but if its what I think it is we just had to scrap a similar design because of rule R16, just a thought.

R16? No problem :cool:

MrForbes

11-01-2008, 22:55

looks like an almost exact silhouette of our 2007 robot!

and nothing at all like this year's