LINKING ERRORS!!!

[AHepperla]

Hey guys, when we compile our code in EasyC, we get a linking error and the error says: Error- section '.code_u2open.o' can not fit the section. Section '.code_u2open.o' length=0x00000064. We're dividing with floats and that seems to be the problem because it works with ints. Any ideas???

[Mark McLeod]

You've run out of Program Memory on the controller.

[JonathanLKS]

If you need those decimals, you could just scale them up by a few factors of ten so you can use ints, divide, then scale it back down.

It'll be faster too.

[Kevin Sevcik]

If you need those decimals, you could just scale them up by a few factors of ten so you can use ints, divide, then scale it back down.

It'll be faster too.
Scale up by factors of 2. Then you can use << instead of *. It's a heck of a lot quicker. You still have to divide unless you're using unsigned ints, however.

[AHepperla]

Alright thanks guys, helped a lot and we're back on track now!!!