Question about the Pressure Switch

[Bomberofdoom]

hey,

Our Pressure switch stops at 110psi.

Any idea why?

Thanks,

[Al Skierkiewicz]

The pressure switch is not terribly accurate. That being said, it should allow your system to reach in the 120-130 PSI range. It might be defective and would then need to be replaced.

[MrForbes]

The pneumatics manual says it is supposed to trip at 115 psi.....

[TubaMorg]

ours has always tripped at 110 - 115 psi indicated pressure. We run the compressor 5-7 seconds longer to reach 120 (programming).