Log in

View Full Version : pic: 1848 finished base

Synergy1848
25-01-2008, 08:55
[cdm-description=photo]29827[/cdm-description]
Tapoore
25-01-2008, 08:56
Are the center wheels rubbing against the Toughbox brackets?
IndySam
25-01-2008, 09:54
might make it turn better, did you try it?
Elgin Clock
25-01-2008, 10:03
Are the center wheels rubbing against the Toughbox brackets?

With the fullsize pic HERE (http://www.chiefdelphi.com/media/img/e3c/e3c9099589ace99507975de146393591_l.jpg), it doesn't look like it.
It may when it gets pushed around and starts to "take a beating" though.

Nothing a simple notch into the support plate couldn't remedy.
Jimmy Nichols
25-01-2008, 10:32
Is your mounting plate a sheet of aluminum that you drilled or was it purchased?
Synergy1848
25-01-2008, 10:43
no, the center wheels don't touch the brackets

Is your mounting plate a sheet of aluminum that you drilled or was it purchased?

thats actually silver pegboard.
jason701802
25-01-2008, 10:50
you've got the negative running out of the power switch and your not using the power dis. block
Astarties
25-01-2008, 13:02
you've got the negative running out of the power switch and your not using the power dis. block

if that's not what your talking about, you may want to look at the diagram that's in the FIRST manual, because jason701802 is right.
pheadxdll
25-01-2008, 13:07
A slight flaw in your wiring. :P Refer to the eletrical wiring diagram in the manual. (I have no idea which manual, hence why I don't have a link :) ) Drive train looks good though (no shortage of power :P ). Good luck!
Synergy1848
25-01-2008, 13:15
i can't beleive no ones gotten it yet, look at the 2 froint wheels
T3_1565
25-01-2008, 13:27
well now that it has been mentioned it looks like the two front wheels aren't in the same spot on the pegboard lol.. the left (left in the picture) wheel is closer to the fron than the right one.
Jeff Waegelin
25-01-2008, 13:28
The chain on the left side appears to be dragging on the ground... looks like the chain was too long!

Is that what you were having us look for?
Uberbots
25-01-2008, 13:38
You are missing your flux capacitor. you need to remember these things (=
Ryan Dognaux
25-01-2008, 14:42
... and it looks like the axles for the wheels aren't in the same places on each side. Looks like you'll be moving one of them.
BradMello
03-02-2008, 21:30
Your axles aren't aligned! :p
Dad1279
03-02-2008, 21:46
Design feature. Stagger for left turns. ;)
Synergy1848
03-02-2008, 21:54
Design feature. Stagger for left turns. ;)

thats what i told our mentor when he noticed it