Log in

View Full Version : Using 2 motors in one toughbox

DarKCroNo
28-01-2008, 16:59
Our team has put together 2 CIM motors into the andymark toughbox, what we're wondering is if we should be connecting them both to 1 victor or 2?
gurellia53
28-01-2008, 17:02
Our team has put together 2 CIM motors into the andymark toughbox, what we're wondering is if we should be connecting them both to 1 victor or 2?

The rules state that you need 1 victor per CIM
thefro526
28-01-2008, 17:03
Each one has to be driven through it's own victor. so you'll need 2 speed controllers for each two motor transmission
DarKCroNo
28-01-2008, 17:12
oh okay thanks alot guys!
jskene
29-01-2008, 09:09
You can use a "Y" PWM cable to drive both Victors from the same PWM port on your Robot Controller.