Telling alliance in the code

[Andrew Schreiber]

Is it possible to tell which alliance you are on in the code? I recall a few years ago (2005 I think) there was an LED that flashed red or blue depending on your color. If anyone knows if it is still possible to check color of alliance I would like to know how. Thanks.

[Alan Anderson]

I don't know of any documented way to tell which alliance you're on. I'm not even sure if that information is part of the field communication this year.

[Andrew Schreiber]

What about telling what channel you are recieving data on. Since each radio transmits on a different channel could you tell your color from that? If so, how could you read that?

[jtdowney]

My suggestion would be to add a simple switch connected to a digital IO. Since you will know your alliance before you queue, just have the drivers flip the switch to whatever alliance you are on.

[Andrew Schreiber]

That is most likely the simplest solution and what I will end up doing. I just thought that it would be kind of cool to do it in code.