wiring a keyang

[neoshaakti]

I tried searching, but im having trouble figuring out how to wire the keyang thats connector is not provided in the kit
do u guys just soder on a connection?
thanks for the help

[Joe G.]

In the bag with all the crimp fasteners, there should be 4 silver connectors. these and the two small black plastic housings get put together to form a connector, which wires can then be connected to.

(look on the bottom of page 12 of the KOP checklist to see what I'm talking about)

[Jim E]

Look on page 12 of the KOP document. They are supplied to you there.

http://www.usfirst.org/uploadedFiles/Community/FRC/FRC_Documents_and_Updates/2008_Assets/Manual/2008%20KoP%20Checklist-RevB.pdf

[neoshaakti]

alright thanks a bunch! can I also use those on a nippo-denso motor?

[Joe G.]

I haven't ever used the Denso motor, but I imagine it would work.

Edit: according to the tips, guidelines, and good practices section of the manual, you can order a matching part, but small slide-on crimp connectors will work as well.

[R.C.]

does anyone know where to get replacements. Need them very badly.

[neoshaakti]

I think these might work:
http://www.ifirobotics.com/accessories.shtml
2-Pin Battery Connector Pack - Mates to the Mini RC

not 100% sure though