Caldwell_D
09-11-2008, 10:08
We're using a blue-tooth wireless transmission, and there is a huge amount of lag between when you hit "up" on the joystick, and when it actually moves. The exact amount of time varies, but it's normally 3-5 seconds. We can't find a hardware problem that may be causing this, and our program seems to be working fine.
We're using LabView to program our robot, and that *may* be the problem. I would tend to doubt it though, because our the other two teams here that are using it have lag, yes, but not nearly the 3-5 seconds we have. If you need to see our program I can post it, so if that would help just say so :).
So anyway, with lag like this we really can't do any testing of our robot... if anybody else has run into this problem, or may have a possible solution, then please tell :D.
-Caldwell
We're using LabView to program our robot, and that *may* be the problem. I would tend to doubt it though, because our the other two teams here that are using it have lag, yes, but not nearly the 3-5 seconds we have. If you need to see our program I can post it, so if that would help just say so :).
So anyway, with lag like this we really can't do any testing of our robot... if anybody else has run into this problem, or may have a possible solution, then please tell :D.
-Caldwell