Log in

View Full Version : Software for progaming in FRC

frcchile
26-12-2008, 19:03
Hello I´m from chile my team is #2576 the team name is "chilean heart"

My question is where can i download Labview and Windriver so that i can begin learning before our kit arrives :confused:

I need help please

Thank you...:yikes: :D
tdlrali
26-12-2008, 19:09
It is not available online. This is far-fetched, but can you borrow the disks from teams near you?
Jon236
26-12-2008, 19:18
Since you have a week to start, I would go to the NI FIRST Community website at http://decibel.ni.com/content/community/first and start going through the LabView tutorials...there is a lot of materials there and you time will not be wasted!

Welcome to FIRST!
frcchile
26-12-2008, 19:42
Since you have a week to start, I would go to the NI FIRST Community website at http://decibel.ni.com/content/community/first and start going through the LabView tutorials...there is a lot of materials there and you time will not be wasted!

Welcome to FIRST!

Well I like me more windriver i think that is a good software very similar to Robot C or not???
and what is the diference between Windriver and labview?

Thank you !!
" AIM:cignacio6 " :D
EHaskins
26-12-2008, 23:56
Well I like me more windriver i think that is a good software very similar to Robot C or not???
and what is the diference between Windriver and labview?

Thank you !!
" AIM:cignacio6 " :D

Windriver is a IDE for C++. If you want to use Windriver google for C++ tutorials.
Labview is a graphical drag-and-drop programming tool. If you want to use Labview you can use the resources Jon236 mentioned.

C++(Windriver) is more similar to RobotC than Labview.
McGurky
27-12-2008, 09:58
so there is no way of buying either of these online??
tdlrali
27-12-2008, 11:26
No, they are both custom-tailored for FRC, and aren't available online.
GGCO
27-12-2008, 12:32
I believe that all of the software should have come in your kit of parts.
Vikesrock
27-12-2008, 15:03
I believe that all of the software should have come in your kit of parts.

The 2009 KOP has not yet been received by teams. Some teams have received an early shipment of their 2009 controls which does contain the FRC versions of both Windriver and Labview.

If you didn't get your controls shipped early then you will have to wait until you get your KOP on Jan. 3rd to get access to these software packages.
McGurky
27-12-2008, 21:41
i think my team used up all of the 5 licences, is there any team that has extra and can sell them or anything?
EHaskins
28-12-2008, 00:13
i think my team used up all of the 5 licences, is there any team that has extra and can sell them or anything?

What software are you referring to? Labview and WindRiver don't have a limit that I'm aware of.
McGurky
28-12-2008, 11:00
o really, i had thought that my team leaders have said that they only had five copies, and all of the seniors got them, well anyway, i will have to chec back again to make sure, because i would love to have that software.
rdlevy1215
28-12-2008, 15:05
o really, i had thought that my team leaders have said that they only had five copies, and all of the seniors got them, well anyway, i will have to chec back again to make sure, because i would love to have that software.

Only Software that has a 5 license limit is Autodesk 3D Studio Max (Inventor is 10, but Labview/Windriver are unlimited)
McGurky
28-12-2008, 15:15
ok thanks, i must have heard that wrong then, as for autodest products, i get them free for being a student, i guess i will need to check back with one of my mentors to get a copy!!
McGurky
29-12-2008, 20:18
Thank you guys, i talked to some people, and succesfully got a copy of labview!!! thank you to all!