IGES File of teh KOP

[MachineSMMC]

Would somebody be interested in exporting the entire KOP as an IGES files so I can bring it into another software?

Thanks
Chris Tellers
Team #3026
The Berzerkisatni Knights

[MachineSMMC]

I am using SolidWorks and would love for somebody to export the KOP as an IGES file so I can import them into SolidWorks.

SolidWorks is not able to import the Inventor or the Pro-E Files.

Thanks

[mplanchard]

I am working on it - Here is the slick wheel from AndyMark. I cant open the Inventor or ProE files so I need to get these from the manufacturers and convert. The process is slow. Marie

http://www.3dcontentcentral.com/parts/download-Part.aspx?id=13542&catalogid=171#0

[mplanchard]

Thanks to Andy and Mark I was able to finish the AM Long Frame last night

http://www.3dcontentcentral.com/secure/download-model.aspx?catalogid=171&id=13547

You can download it in IGES, SolidWorks 2007, 2008, Autocad or what ever else.

Thank you too for Felix adding the model for the orital ball.

Marie

[keen101]

Is anyone working on drafting the electronics in Solidworks?

If no one is working on it, i suppose i could start to work on it and post it on the 3dcontent site.... But, i was hoping someone already had some available...

someone did draft the gaming router, and it looks pretty nice.

I use SolidWorks 2007 SE BTW...

[mplanchard]

Here is thelink to the NI Controller on 3Dcontentcentral.com

I don't know the electronics in the kit. Do you have part numbers and manufacturers? I might be able to call them on Monday if they are SolidWorks customers and ask for files on your behalf.

I used a new technology in SolidWorks to save the NI Controller. I took the step model file from NI and confirmed with First CAD Library and then saved the assembly as a SolidWorks part. It is a single part with all extracted faces - much lighter in file size.

http://www.3dcontentcentral.com/parts/download-Part.aspx?id=13576&catalogid=171

Marie

[keen101]

Thanks, the cRIO is one of the things I've already obtained. I'm mostly trying to get the power distribution board, and the digital sidecar. http://andymark.biz/09electronics.html

I think they were made by Diversified systems.

I also think they are already drafted with autodesk inventor, but i don't have inventor currently installed. https://firstbasefrc.autodesk.com/?nd=kitofparts.

also trying to get the Axis camera and perhaps the robot signal light.

this diagram might help a little. http://usfirst.org/uploadedFiles/2009%20Power%20distribution%20diargam.pdf

[mplanchard]

I need a step file to reverse engineer it back to SolidWork format - funny I dont have a copy of Inventor either. Once in SolidWorks format, I can then post it in all file formats. Maybe some one will post tonight - if not, I will do the research for you tomorrow.

Marie

[mplanchard]

Keen

There are some amazing SolidWorks users out there that are helping you out.

Here is the link to the Digital Side Car by TVHS Robotics - great job.

http://www.3dcontentcentral.com/parts/download-part.aspx?id=13579&catalogid=171#

Marie

[mplanchard]

Keen

There are some amazing SolidWorks users out there that are helping you out.

Here is the link to the Digital Side Car by TVHS Robotics - great job.

http://www.3dcontentcentral.com/secure/download-model.aspx?catalogid=171&id=13579

Camera Bracket is by Andrew Bates -

http://www.3dcontentcentral.com/parts/download-part.aspx?id=13564&catalogid=171

For those that contribute to 3dcontentcentral from Jan 18 - Jan 25, 2009, send me a private email with your address and I will send you a SolidWorks Tshirt. Thankyou for helping out all FIRST users.

Marie

[mplanchard]

Here it the link for the camera.

I merged all the components into one part. It is alot smaller in file size.

http://www.3dcontentcentral.com/parts/download-Part.aspx?id=13622&catalogid=171

Thank you Brandon.

Marie

[mplanchard]

Thanks, the cRIO is one of the things I've already obtained. I'm mostly trying to get the power distribution board, and the digital sidecar. http://andymark.biz/09electronics.html

I think they were made by Diversified systems.

I also think they are already drafted with autodesk inventor, but i don't have inventor currently installed. https://firstbasefrc.autodesk.com/?nd=kitofparts.

also trying to get the Axis camera and perhaps the robot signal light.

this diagram might help a little. http://usfirst.org/uploadedFiles/2009%20Power%20distribution%20diargam.pdf


I am not certain if I have all the electronics parts posted on www.3dcontentcentral.com in all file format. Take a look and let me know.
Also, let me know more of the parts you need. Customers have been emailing me files and I just put them up.

Marie

[keen101]

The Robot Signal Light has now been uploaded on www.3dcontentcentral.com. I think most of the electronics have been uploaded by now. There might be a few stragglers like the encoders and stuff but most of it seems to be available now. Thanks for everyone's hard work.

http://www.3dcontentcentral.com/Download-Model.aspx?catalogid=171&id=13657

[Brandon Holley]

Here it the link for the camera.

I merged all the components into one part. It is alot smaller in file size.

http://www.3dcontentcentral.com/parts/download-Part.aspx?id=13622&catalogid=171

Thank you Brandon.

Marie


Anytime Marie...the NUTRONs are glad to be of service to Solidworks, because Solidworks is AMAZING!

[Brandon_L]

Can you guys do the drivers station and modems and stuff? If its not to much to ask the joystick would be sweet also