Can we start a poll to see what programming is being used? [Archive]

PinionTwister

10-01-2009, 10:45

We are using Labview with limited success. Can we start a poll to see who is using Labview, C++/Windriver?

Also, any Wisconsin based teams using Labview. We would like to share thoughts/training/ideas with you.

Karl200

10-01-2009, 10:58

Team 1785 JagWired Robotics is going to be using Labview

Tottanka

10-01-2009, 11:59

Team 2669 will be using labview.

whitetiger0990

10-01-2009, 12:35

1189 here will be using LabVIEW. =)

NorviewsVeteran

10-01-2009, 12:39

1793 is using LabView.

rwood359

10-01-2009, 12:40

359 Waialua HI is using LabView

suj

10-01-2009, 12:57

1219 is using labveiw

ComradeNikolai

10-01-2009, 13:02

<meek> Team Hornet 2603 is using C/C++. <end meek>

rsisk

10-01-2009, 13:37

2493 is using LabView

Sauce

10-01-2009, 13:40

1245 be use teh LabView

knine143

10-01-2009, 13:43

1047 is using C++/Windriver

Ragnarokae

10-01-2009, 13:53

967 is using Labview

Team2883

10-01-2009, 13:56

Team 2883 using labview, lots to know, so little time to play.

Pneumaticsman

10-01-2009, 14:02

team 1566 is using LabView...so many pictures...so little time

keen101

10-01-2009, 14:13

Team 1357 will probably be using both LabVIEW & C/C++.

Bongle

10-01-2009, 14:23

2702 is all about the C/C++, baby.

rogerlsmith

10-01-2009, 14:44

904 is having success using WindRiver and C/C++

Robostang 548

10-01-2009, 14:45

Team 548 will be using both LabVIEW and C++.

laultima

10-01-2009, 14:48

1458 is using, as it is known around here, Win Driver

Chath Maral

10-01-2009, 14:48

1785 is using LabView! though I am more expericed in C++...:)

goodsky

10-01-2009, 14:53

Team 1902 wrote our own IDE for Visual P# (pig sharp)

(naaaah just kidding, I know, we had you going eh? 1902 is comfortable with good old C++ in WindRiver (although we did decide P# is the way of the future!))

Lucretius

10-01-2009, 15:10

395 will be using C++.

7-11number1

10-01-2009, 16:15

Team #1711 - Windriver C/C++

writchie

10-01-2009, 16:58

Until we get python ported, 2152 is using C++

EncodersRUS

10-01-2009, 18:55

2550 is using LabVIEW!!!!:D

krupinski

10-01-2009, 19:11

Team 204 is leaning for LabView

Hanna2325

10-01-2009, 19:27

We (the robettes) are using C++:D

brianc217

10-01-2009, 19:31

team 1153 is using labview (a.k.a.- MS Paint with wires) i do like it though.

millerbot1

10-01-2009, 19:31

Team 2549 will be using LabView and feel weeks ahead of last year as we have successfully attached new controller and programmed last year's robot to drive. We hosted 4 LabView training sessions in the Twin Cities metro in November/December for metro teams in conjunction with Team 2129 UltraViolet from South West High School in Minneapolis.

ExarKun666

10-01-2009, 19:33

I started a poll, if you guys/girls want to keep track of this:
http://www.chiefdelphi.com/forums/showthread.php?threadid=71837

JDeCola

10-01-2009, 19:46

1158 will be using Windriver

Kahn!

10-01-2009, 19:59

Team 1379 is using Labview with growing success.

PinionTwister

10-01-2009, 20:21

We are using Labview and feel as though we are 4-5 weeks ahead of prior years. This program is simply amazing. Thanks for starting the poll (I didn't know how to do it).

PinionTwister

10-01-2009, 20:23

I started a poll, if you guys/girls want to keep track of this:
http://www.chiefdelphi.com/forums/showthread.php?threadid=71837

I can't get the link to work for the poll. Thanks for putting it together. Perhaps you can try again or repost the link.

Michael_MARS

10-01-2009, 20:40

1523 is using LabVIEW.... and the link to the poll dose not work for me either.

bobbyt14

10-01-2009, 21:04

744 will be using C/C++

katyrobo2177

10-01-2009, 21:07

The Robettes 2177 will be using C/C++ :D

thefro526

10-01-2009, 21:56

We have some underclassmen experimenting with labview...

If all else fails we'll program it in C/C++

XXShadowXX

10-01-2009, 22:03

team 2604 is using teh labveiw

RyanW

10-01-2009, 22:05

Team 449 is using LabVIEW. Except I'm apparently so used to C that I write pseudocode in it, so we may have some small functions in C/C++...

comphappy

10-01-2009, 22:16

Its all about the C++ I stopped using paint for anything legit about 10 years ago. In all seriousness, you really can do a lot more in windriver then the NI guys say you can, one of them was kind enough to tell me that you cant do as much debugging in windriver which is dead wrong, it is the other way around. Windriver just takes some time to get use to, once you get to know eclipse, everything is a few keystrokes away.

jktheta

10-01-2009, 23:23

Team 1370 is using C++.

kamocat

10-01-2009, 23:24

Team 2557 will be using Labview. 10 cent donations welcome.

Stimpy1901

10-01-2009, 23:31

Team 2348 in Honolulu is using Wind River. We finally had a successful test of the sample codes (for the camera and teleop driving) yesterday.:)

deusex

10-01-2009, 23:34

422=Labview all the way

EricS-Team180

10-01-2009, 23:49

S.P.A.M's using C/C++ and WindRiver

R.C.

10-01-2009, 23:53

1323 aka c++ eh?

Sovietmagician

10-01-2009, 23:59

Team 694 stuypulse here, We will be using C++.

ranman96734

11-01-2009, 08:27

Team 2090 -- I want to use C++ but a lot of other people on the team want me to use Labview. I'm the one programming though so I'll decide in the end, for the moment I'm using Labview with little success and a lot of frustration. I think Eclipse is better.

byteit101

11-01-2009, 09:07

451 is using C++ (windriver)
we decided it is easier to scroll up and down and hit ctl-tab to see different C++ files, than to move around in 2 directions using the track pad and nubs on our smallish screened laptops

KevinReid

11-01-2009, 09:42

2609 is using Labview - gotta love the watertank!

1708xMr.Roboto

11-01-2009, 11:24

Team 1708 will be using LabView.

slavik262

11-01-2009, 14:28

Team 537 is using C++.

The new Wind River update actually allows you to write C++ code that outputs to the LabVIEW dashboard project. This way, you have the complete versatility of C++ and the rapid and graphical debugging allowed by LabVIEW.

We are having large amounts of success in C++, and already have a working implementation using multiple tasks and a buffering system we created. Many thanks to the people at WPI for the critical region/mutex support.

Shinigami2057

11-01-2009, 15:36

Team 1350 is using WindRiver/C++ for our main development, with our team starting to pick up LabVIEW by customizing the dashboard interface.

xxsumz

11-01-2009, 16:53

Team 2625 using LabView

Red Mage

11-01-2009, 21:48

Team 1546 will be using C++ with Windriver.

Poor misguided fools using G. I will pray for your souls.

mrwigeon

11-01-2009, 23:05

Team 2122 from Boise ID will be using windriver.

lenny8

11-01-2009, 23:21

1018 will be using labview

Beck

12-01-2009, 12:25

Team 2108 (Team Awkward Turtle) is using Windriver/C++ this year

Jared Russell

12-01-2009, 13:08

341 is using C++

guakam0li1089

12-01-2009, 13:14

team 1089 will be using labview

Kruuzr

12-01-2009, 13:20

1922 is using C++.

RedneckGeek

12-01-2009, 13:25

Team 2436 is using Labview.

Kitmor

12-01-2009, 13:53

Team 847 PHRED is using LabVIEW this year. All our experienced programmers wanted to use C++ (Wind River), but our mentors insisted we use LabVIEW. Needless to say, our experienced programmers found something else on the team to do this build.

team877

12-01-2009, 14:38

Team 877 is using Labview

Redneck

12-01-2009, 14:50

599 is using WR Workbench.

Blad3101

12-01-2009, 17:31

Team #1518 will be using both LabVIEW and Wind River.

Commissar

13-01-2009, 15:18

We are using c++ for most of it.

matrixrobotics

13-01-2009, 15:51

179 is using C++

Sauce

13-01-2009, 19:49

This poll is already started:

http://www.chiefdelphi.com/forums/showthread.php?t=71600&highlight=Windriver%3F+Labview%3F

Felipe Sagui

13-01-2009, 21:07

We are using Labview and WR

kE7JLM

13-01-2009, 21:50

LabView for it probing abilities, no longer will the construction team have the miss conception that programming might be wrong, simply stick a probe and verify that the code in fact is working (In Real Time). Thoroughly proving the hardware is non-functional.

fordfiler6

14-01-2009, 18:01

Team 1559, Devil Tech, is using Labview and we've found it quite intuitive to learn regardless of prior programming experience (although it does help)

jmanela

15-01-2009, 12:46

Team 2834 is using LabView:D

Something41

17-01-2009, 19:46

team 2062, from Waukesha Wisconsin is using LabVIEW.

ComradeNikolai

17-01-2009, 20:11

Mikesername

17-01-2009, 20:37

Team 3044 from Ballston Spa, NY is using LabVIEW.

CPUGenuis

17-01-2009, 21:14

1208 on LabView...... so many buttons......

mswalker

17-01-2009, 22:25

2583 is using LabVIEW

EricGoodchild

17-01-2009, 22:51

Team 399 C/C++

jph399

18-01-2009, 00:36

2500 is using Labview

DtD

18-01-2009, 02:19

Team 2334 will be using C++

~DtD
PS> Can sombody with special permissions make this a real poll, I'd like to see the statistical results...

Actually, there is already a poll: http://www.chiefdelphi.com/forums/showthread.php?t=71600

Chipawa

19-01-2009, 08:47

For Team 1111, the senior programmers wanted to use C++, so C++ it is. We may use Labview for the dashboard.

rsegrest

19-01-2009, 12:42

2582 is using LabView...:ahh:

dnrobotics11

19-01-2009, 20:40

Team #2589 is using WindRiver

DZeiba

20-01-2009, 18:39

241 will either be using jsut C++ or LabView/C++

vexman2222

22-01-2009, 18:09

team 2169 is using labview

Darkcrosbone

22-01-2009, 19:45

Erm... i looked at labview... and it looks do-able but ..... it just confuses me, i think our team (956) will be using WindR

i do not know C++ or how to use labview and... C++ looks better to me.... even though labview is supposed to be easier for beginners

cloud_254

22-01-2009, 20:15

i'm not a programmer but we r using labview. and i does look confuesing to me. but then again it might just be me

Legendofty

22-01-2009, 20:25

Team 467 is programming in LabVIEW! :D

comwiz7

22-01-2009, 23:58

Team 1323 using C++

LinuxMercedes

23-01-2009, 00:10

1444 hasn't decided yet, but it looks to me like Win Driver (thanks 1483 =]) will probably be our choice. Mostly because both our programming mentor and I are more familiar with OOP and C-style syntax than LabView.

leftylink

23-01-2009, 20:05

Cross posting from the poll thread...

Team 1318 is using LabVIEW. Though we have three veterans, all seasoned C programmers, we are all seniors and must pass on our knowledge. The new programmers have a range of programming experience and we thought it easier to teach them LabVIEW. In addition, LabVIEW is a little *too* attractive. Its debugging capabilities are impressive, with the ability to "probe wires" or look at/manipulate values on our front panel or whatnot. (though I have heard that C++ is now capable of working with the Dashboard...) Under other circumstances, I would have used C++, but we will use LabVIEW and see how it goes...