Log in

View Full Version : pic: 1885 Teaser

JesseK
15-01-2009, 20:38
[cdm-description=photo]32365[/cdm-description]
Smaug
15-01-2009, 20:39
dude its hex cell
CraigHickman
15-01-2009, 21:27
Oooooh. I wish we had the budget to use Honeycomb aluminum.... That stuff is niiiiice!
Akash Rastogi
15-01-2009, 22:14
how much would about 2ft^2 of that weigh? At that thickness. Thanks.
Woody1458
15-01-2009, 22:15
Is it just me, or are the wheels on the corners and 45˚ to the robot frame? I guess some form of the omniwheel omnidirection drive
CraigHickman
15-01-2009, 22:28
Is it just me, or are the wheels on the corners and 45˚ to the robot frame? I guess some form of the omniwheel omnidirection drive

Or Ackermann steering. :P
Starke
15-01-2009, 22:34
Looks like a good design to me! The only comment I have is that motor says FRC 2008 on it. Is that an old motor or am I reading it wrong?
its da PAT!!!
15-01-2009, 23:06
Oooooh. I wish we had the budget to use Honeycomb aluminum.... That stuff is niiiiice!

Honeycomb aluminum is really nice and expensive but well worth it our team used it on our 2007 ramp bot made the ramps very light and strong!!
T3_1565
15-01-2009, 23:19
1565 gets free honeycomb alumium from our sponser ATS.. its wonderful stuff, pretty light and really strong. I like the low ground clearance on the bot too.

Linkage drive maybe *crosses fingers* could be....I wish....

EDIT: on second thought.. I just read who posted it. Jesse, please tell me you guys actually did it and can I have pictures? :D
Vince lau
16-01-2009, 08:58
twitch 2 :O
T3_1565
16-01-2009, 09:57
I hope so lol. I would be so proud *sniff*
JesseK
16-01-2009, 10:00
twitch 2 :O

Aye, this is a Twitch 2.0 prototype (sans pistons)!

Actually we won't name it 'Twitch' because that's a 1565 trademark, but when we talk about the design, programming and controls we use 'twitch' as a verb every 10 seconds or so :D

As with any revision 2, there are upgrades and new problems, so we won't realize the fun aspects until it's fully functional. If everything stays on schedule, next weekend we'll see it operating on near-identical conditions on an ice skating rink...
T3_1565
16-01-2009, 10:16
sweet! I'm so proud!

Any chance I can see what you did differently? (you already explained it in PM but a pic will be worth more than that lol.)
JesseK
16-01-2009, 10:32
Pictures will come soon, very soon...and probably more on our website more than CD. We had to do some (seemingly) magical rearrangement to get the compressor, cRIO and battery to fit within the bottom area there. The CAD says that there's still room for the pistons, but I'm always a bit antsy until I see something when it's that close. :ahh:
team1203 4life
18-01-2009, 11:00
we used the honeycomb aluminum in 2007 worked out perfectly on our ramp got us all the way to the finals