Log in

View Full Version : 2007 Controller Power cable?

reflion
15-01-2009, 22:44
I'm not electronics--I'm mechanical--so I have no idea what I should be looking for. We're prototyping our robot with our robot from 2007, but we lost the power cable to the controller. What are the relevant...stats? Details? about that cable? We're wondering if we can replace it with some other stuff we have around the room.
JamesByrne
15-01-2009, 23:02
If you are talking about the crio you need to supply your own cable, look at the first electrical diagram

If you are talking about the drivers station you need to use the supplied adapter. Let us know what you are talking about.
Vikesrock
15-01-2009, 23:07
If you are talking about the crio you need to supply your own cable, look at the first electrical diagram

If you are talking about the drivers station you need to use the supplied adapter. Let us know what you are talking about.

He said 2007. I believe he meant the OI for the IFI control system. I don't have the specs for this supply at the moment, but hopefully someone else will be able to help you out.
JamesByrne
15-01-2009, 23:10
ok sorry im tired :) i should have read better. ya i do not have this handy either. But i can look it up tomorrow for you.
Justin Stiltner
15-01-2009, 23:11
Should be the same as the one in this thread
http://www.chiefdelphi.com/forums/showthread.php?t=48364&highlight=operator+interface+power+supply

your looking for a wall wart power transformer, there is a photo in the thread showing the label
RyanN
15-01-2009, 23:48
I believe they were 9V 1500ma. Center pin positive.
Andy L
16-01-2009, 00:52
I'm not in our shop right now, so I can't be sure, I think it says EVERGLOW in big letters on it
Al Skierkiewicz
16-01-2009, 07:33
I'm not electronics--I'm mechanical--so I have no idea what I should be looking for. We're prototyping our robot with our robot from 2007, but we lost the power cable to the controller. What are the relevant...stats? Details? about that cable? We're wondering if we can replace it with some other stuff we have around the room.

The IFI website has all the info you would want or need on their control system.
http://www.innovationfirst.com/