Servos not moving

[Marlfox]

Our servos are not responding at all, but they do give values in Labview and the motors will run, but our servos do nothing. We have replaced the servos and are using example code. Please help us!!!!

[AdamHeard]

Our servos are not responding at all, but they do give values in Labview and the motors will run, but our servos do nothing. We have replaced the servos and are using example code. Please help us!!!!

I believe there is a jumper that mus be done on the digital sidecar per each pwm channel if you are using servoss. This provides the additional current servo's require.

[Marlfox]

thanks guy in the computer