Log in

View Full Version : 2594 Preview

Dubdub
13-02-2009, 20:54
We have been getting a lot of requests for videos, and more pictures. The main problem was that I was putting them up, on our old thread. The problem with that is that our other thread is so deep in Delphi, that I am going to post a new thread that way people can find a link to the videos we have, so here they are:

http://www.youtube.com/watch?v=xDHkYPW5RfA
http://www.youtube.com/watch?v=I4xAapmRKcI
http://www.youtube.com/watch?v=nvAHAL4kdco
http://www.youtube.com/watch?v=YC60mZ9YuN0
http://www.youtube.com/watch?v=LJEEPHB51XM

You can see the evolution of the robot through these videos. First just a chassis, then we have Mach One of the tube, (Videos two and three), and then Mach Two, (Videos four and five), which is the current setup that we are using.

Thanks to all of the people that have given such awesome feedback and comments. Good Luck to all teams.

Also our website:
http://naskco-robotics.org/

This is the website that we made, our first ever website that my friend and I made. Not bad for two rookies in the subject.
zrop
13-02-2009, 21:46
By looking at previous pictures you posted, i was kinda expecting the balls to shoot a lot faster out of there. I'm kinda disappointed XDD
Cyberphil
13-02-2009, 21:51
Looks awesome! Are you going to put something on the end?.. Or are you just having them shoot out like that? Either way, it looks really promising!!
Cyn
13-02-2009, 23:03
These are older videos befor we changed the bursh motor to a sim motor.
It now spins at a much faster pace shooting the balls faster.
Also we are currently attatching an extention piece for the end that has one bursh on it with it's own motor so it will be the 'power' at the end of the line ;]

Cindi
mrnoble
13-02-2009, 23:23
how did you manage to put a SIM on the shooter? What are you using for your drive wheels?
EricH
13-02-2009, 23:24
how did you manage to put a SIM on the shooter? What are you using for your drive wheels?Two of the other three allowed CIMs, I believe.
mrnoble
13-02-2009, 23:29
I saw four SIMs on their earlier pictures; one per wheel. I'm wondering if that changed.
EricH
13-02-2009, 23:32
I saw four SIMs on their earlier pictures; one per wheel. I'm wondering if that changed.
They said that they changed it to 2WD.
mrnoble
13-02-2009, 23:33
Thanks, I missed that.:o
Cyn
14-02-2009, 13:13
Yes sadly we had to change it to 2WD from the rear cus the motors were hitting the cage. however this became an advantage to us allowing us to put more power to the brushes.

Were going to Micron today where they have graciously set up a practive feild for us to practice on :] so we hope to have more pics and vidoes up soon.

Thanks for all your support :D


Cindi