Digital Side Car Specs

[Chief Pride]

Does anyone know what the output voltage and current is for the digital outs?

Thanks in advance.

[EricVanWyk]

Those come straight from the cRIO's 9403 module (plus a 10k pullup), so that spec is in its manual (http://sine.ni.com/nips/nisearchservlet?nistype=psrelcon&nid=203425&lang=US&q=FQL:(locale%3Aen)+AND+(phwebnt%3A7818)+AND+(nico ntenttype%3Aproductmanual)+AND+(docstatus%3Acurren t)%20RANK%20nilangs:en&title=NI+9403+Manuals).

The voltage is 5V. The overcurrent protection cuts in at 64mA total, read the manual for details.

[Chief Pride]

Those come straight from the cRIO's 9403 module (plus a 10k pullup), so that spec is in its manual (http://sine.ni.com/nips/nisearchservlet?nistype=psrelcon&nid=203425&lang=US&q=FQL:(locale%3Aen)+AND+(phwebnt%3A7818)+AND+(nico ntenttype%3Aproductmanual)+AND+(docstatus%3Acurren t)%20RANK%20nilangs:en&title=NI+9403+Manuals).

The voltage is 5V. The overcurrent protection cuts in at 64mA total, read the manual for details.

Thanks alot, I was on usfirst.org and couldn't find any of this information.

[EricVanWyk]

Did you find the datasheet for the digital sidecar?

[spc295]

we broke on of ours.