pic: 2039's '09 drivers station [Archive]

View Full Version : pic: 2039's '09 drivers station

Raptor2

15-03-2009, 20:45

[cdm-description=photo]33414[/cdm-description]

GarrettF2395

15-03-2009, 20:46

What information did your laptop display?

keehun

15-03-2009, 21:10

I also am very curious on how you transmit all the information back. Pin outs on the DS, read by your own custom software?

Raptor2

16-03-2009, 00:33

We used the Laptop to show the status of our 4 photoeye sensors and our dedicated empty cell mode. It would also display the voltage of our battery. The Application was created in labview.

The Driver Station would relay the information to the laptop through the same ethernet cord used for uploading code. If you'd like specifics on how we relayed the info back, I can look into that as well.

Justin_B

16-03-2009, 00:46

looks nice

Akash Rastogi

16-03-2009, 22:24

I like showing off....hehehe, I wish we had done it this year since we have a faster response from the camera and the cRIO

Check out the thumbnail in the first one..
http://www.chiefdelphi.com/forums/showpost.php?p=752376&postcount=5

Here's some more pics and info...
http://www.chiefdelphi.com/forums/showpost.php?p=752386&postcount=9

Student designed, fabricated and built. Laptop was donated by a mentor. PS. The thing is super heavy, my least favorite to use for demo's b/c we have to carry it around..lol Then again, we go a bit over the top with our controller box

http://www.vimeo.com/3234826