Log in

View Full Version : How to connect the Workbench with the cRIO?

kentschool
14-12-2009, 16:21
I have trouble to deploy the default programming into the cRIO, and I think the main reason is that we didn't actually connect the Workbench with the cRIO somehow...how to connect the Workbench with the cRIO? Thank you!
slavik262
15-12-2009, 17:50
The main problem we had when starting up is making sure all the IPs are configured. Make sure your PC is set to 10.xx.yy.6, where xx are the first two digits of your team number and yy are the second two. Make sure to just test basic connectivity by pinging your robot at its IP as well.
garyk
23-12-2009, 21:26
I have trouble to deploy the default programming into the cRIO, and I think the main reason is that we didn't actually connect the Workbench with the cRIO somehow...how to connect the Workbench with the cRIO? Thank you!

And make sure your team number is set in the WindRiver downloader preferences:

WindRiverWorkbench => Window => Preferences => FIRST Downloader Preferences
yara92
28-12-2009, 16:03
I have trouble to deploy the default programming into the cRIO, and I think the main reason is that we didn't actually connect the Workbench with the cRIO somehow...how to connect the Workbench with the cRIO? Thank you!

Try to CompactRIO Imaging Tool Each image contains a cRIO filesystem, VxWorks kernel image, FPGA image, FIRST software, and configuration files for the cRIO-FRC controller. Reimage your cRIO including changing languages and updating system software.