Vacuum Pump

[StrykeForce]

Ok we have a vacuum pump and motor assembly. Its a off the shelf assembly. Is it leagle to run the stock motor? Or do we have to use a KOP motor, wich is way to much power. The assembly is a hargraves BTC-IIS series pump.

Here is the link to the Data sheet.

http://www.hargravesfluidics.com/pdf...Data_Sheet.pdf

Thanks

Hayden Taylor
Team #2767

[Vikesrock]

Ok we have a vacuum pump and motor assembly. Its a off the shelf assembly. Is it leagle to run the stock motor? Or do we have to use a KOP motor, wich is way to much power. The assembly is a hargraves BTC-IIS series pump.

Here is the link to the Data sheet.

http://www.hargravesfluidics.com/pdf...Data_Sheet.pdf

Thanks

Hayden Taylor
Team #2767

The only motors you can use that did not come in the KOP are the exceptions listed in <R52-B>-<R52-D>.

Basically you will have to use a KOP motor or one of your allowable additional CIMs to power the pump.

Also, your data sheet link is broken.