Wireless Setup

[executionR]

So here's our problem. We looked up the directions in the manual and followed all the steps correctly. But on the last step, when configuring the LINKSYS router, we have a problem. When trying to change the IP to 10.XX.YY.4. (10.30.80.4 in our case.) In the diagram, they have the IP set to 10.0.0.4 and underneath that, the diagram has changed along with it, but it doesn't change for us.

We decided to start fresh and reset the router and the game controller and re-configure the setup. This is our 2nd year in FIRST and we didn't have this problem last year.

Any ideas?

[ericand]

Are you saying that you can not change the Linksys Router address to
10.<Team>.<Number>.4?

I'm having trouble understanding exactly where you are having problems.

[Mark McLeod]

It might not change until you've saved the settings and rebooted the router if you're talking about what I think you might be talking about...

[executionR]

I read up another thread and it said that it wouldn't update into it was rebooted again. So I went ahead and just changed it to 10, and when I went to the next step to test it, I was unable to connect to 10.30.80.4 nor 10.30.80.1.

Suggestions?

[Mark McLeod]

And you reset your PC's IP address too before trying to reconnect?

[executionR]

Yes, I change the static IP and all that good stuff. Can't figure out why it isn't working though. :(