KOP gearboxes and FisherPrice Motors

[Free Willy]

Is there a way to attach a fisherprice motor to the gearbox from the KOP? Or is there a simple way to attach the fisherprice gearbox to the KOP gearbox?

[R.C.]

If you have the time, the easiest and cleanest way to do it.

Would be to buy this:

http://andymark.biz/am-0347.html

This is a FP planetary which has the same mounting holes as a CIM, so it would mount to the Toughbox super easy.

-RC

[EricH]

Not directly.

Try an AndyMark Planetary (http://andymark.biz/am-0002.html) gearbox; it'll slow the FP down a bit, but should do the trick.

Or you could make an octagonal FP gearbox-shaft coupling and use that to drive the Toughbox.