Soldering Wires to Motors [Archive]

rsegrest

19-02-2010, 21:02

So, we are using a banebot motor to power a shaft for ball control. If you have worked with the banebots you know the posts leads are EXTREMELY small. We have not yet been able to find crimps small enough to fit the leads. Are we allowed to solder the wires to the leads on the motor and if so what are the risks to the banebot if we do this?

Thanks everyone...

MrForbes

19-02-2010, 21:05

The lugs on the motor are designed to have wires soldered on. Be careful, use an appropriately sized soldering iron, powerful enough that you can solder it quickly so as not to melt the plastic.

rsegrest

19-02-2010, 21:09

THANK YOU!

Squirrel,

You have been more help to us this year than you know. I have posted more questions here this year than any previous and you have been a consistant answerer (don't know if that's really a word or not but what the heck, it's four days from ship and you know how it goes) so a personal thank you to you for posting on Delphi and helping out all of us!

Robyn:p

the man

19-02-2010, 21:13

The lugs on the motor are designed to have wires soldered on. Be careful, use an appropriately sized soldering iron, powerful enough that you can solder it quickly so as not to melt the plastic.

If these are the window motors, we cut off the plastic around the conecters and soder them on.

MrForbes

19-02-2010, 21:15

They are not the window motors. The window motors are designed to use a special connector.

The "Banebots" motors are actually the Mabuchi motors

(hopefully this is what they're asking about....as there were no actual Banebots motors included in the kit this year, so it's illegal to use motors from Banebots, unless they happen to be CIMs)

rsegrest

19-02-2010, 21:19

The "Banebots" motors are actually the Mabuchi motors

(hopefully this is what they're asking about....as there were no actual Banebots motors included in the kit this year, so it's illegal to use motors from Banebots, unless they happen to be CIMs)

My apologies, they are in fact the Mabuchi motors with Banebot gearboxes...PLEASE tell me this combination is legal...

MrForbes

19-02-2010, 21:39

As long as you are using exactly the motors that came in the KOP, and not some other Mabuchi motors, it should be legal.

rsegrest

19-02-2010, 21:42

These are actually the Mabuchi motors that came in the 2009 KoP...

MrForbes

19-02-2010, 21:45

Then you might be in trouble....you can only use the motors that came in this year's KOP, or exact replacements. The motors from last year are different.

They look almost the same, but the part numbers, torque, current, speed, etc are all different.

sorry!

rsegrest

19-02-2010, 21:48

Looking for the specs on the new Mabuchis now to see if our gearbox will fit it. Thanks for all the help!

rsegrest

19-02-2010, 22:01

Then you might be in trouble....you can only use the motors that came in this year's KOP, or exact replacements. The motors from last year are different.

They look almost the same, but the part numbers, torque, current, speed, etc are all different.

sorry!

Found the specs I was looking for and our current gearboxes will in fact work! Talk about getting lucky, of course if the children had actually TOLD me what they were planning life would have been MUCH easier.

spaztec

19-02-2010, 23:59

They are not the window motors. The window motors are designed to use a special connector.

The "Banebots" motors are actually the Mabuchi motors

(hopefully this is what they're asking about....as there were no actual Banebots motors included in the kit this year, so it's illegal to use motors from Banebots, unless they happen to be CIMs)

Do you think you can link me to wherever you get the special connectors for window motors?

I've been hacking up female unshielded quick disconnect terminals and putting them inside,then filling it up with hot glue.

Would love to use the legit connectors.

MrForbes

20-02-2010, 00:12

I don't know where you can get the special connector (aside from an auto salvage yard, which probably does not meet the COTS requirement). I just mentioned that they are designed to use one.

Mark McLeod

20-02-2010, 01:15

Check this thread (http://www.chiefdelphi.com/forums/showthread.php?p=919353) for the window motor connector

Akash Rastogi

20-02-2010, 01:47

Found the specs I was looking for and our current gearboxes will in fact work! Talk about getting lucky, of course if the children had actually TOLD me what they were planning life would have been MUCH easier.

Yes the 2010 RS555s work with the BB P60 planetary series.