In need of 2 Solenoid Valves

[ggberg]

I'm looking for (2) 3-way solenoid valves, 12vdc or 24vdc rated 125PSI

Does anyone know of a supplier for the valve as well as a part number?

We are hoping to get them before the Championship but our current supplier does not carry them.

Thank you for any help!

[Mr_Fred]

If You have a Motion Industries in your area, they carry Festo Valves
of all types...

Mr_Fred (Mentor 3394)

[Gary Dillard]

There is an SMC distributor in Norcross:

Flodraulic Group-Atlanta
1790 Corporate Drive Suite 330
Norcross, GA 30093
Phone: (888) 925-8935
Fax: (770) 925-4207
http://www.flodraulicgroup.com

The part we used is SY3220-5LOU-N7-S; you will also need to buy one fitting for the input side (the outputs already have 1/4" tubing QD fittings), which is part number KQ2H07-M5.

The 5 in the part number is 24V; same part number with a 6 is 12V.

Here (http://www.smcetech.com/CC_host/pages/custom/templates/smc_v2/prodtree_product_2.cfm?&cc_nvl=((catalogCode,smc),(lineCode,V_M_US),(produ ctCode,1800),(prodtreeID,27777),(nodeCode,1800))) is the SMC webpage where you can see the options for this valve series.

Here (http://content.smcetech.com/pdf/SY3000_Valve.pdf) is the catalog, which you will need to print the sections that show the flow rate and orifice size to the inspectors.

Here (http://www.chiefdelphi.com/forums/showthread.php?t=81946) is the information you will need to show that they are rated to 125 psi.