LVMastery
17-01-2011, 11:12
The next two installments of The Seven Steps to FRC Robotics Success have now been posted by Enable Training and Consulting.
Now you can find Steps 1 through 6 on FRCMastery.com, with only the final step remaining.
See the dropdown menu at the top of the page to LabVIEW for FRC. There’s a link to all the 2011 videos there.
In Step 5 we will:
• Investigate Autonomous Mode
• Enable Autonomous Mode
In Step 6 we will:
• Rotate the servo by 10 degrees each time a joystick button is pressed.
• When the servo angle is greater than or equal to 180 degrees, the servo returns to 0 degrees.
• Shift Register to store data
• Wiring into a SubVI Accessing Data
• Boolean Functions
Remember that all the material from the 2010 season is still ready and available.
Now you can find Steps 1 through 6 on FRCMastery.com, with only the final step remaining.
See the dropdown menu at the top of the page to LabVIEW for FRC. There’s a link to all the 2011 videos there.
In Step 5 we will:
• Investigate Autonomous Mode
• Enable Autonomous Mode
In Step 6 we will:
• Rotate the servo by 10 degrees each time a joystick button is pressed.
• When the servo angle is greater than or equal to 180 degrees, the servo returns to 0 degrees.
• Shift Register to store data
• Wiring into a SubVI Accessing Data
• Boolean Functions
Remember that all the material from the 2010 season is still ready and available.