Gray Tape Angle Question

[Hallry]

When the gray tape branches into the 'Y' towards the scoring pegs, what is the angle that the two paths separate at? Thanks in advance.

[Hallry]

I'm still in need of an answer to this question, if any of you can find me one. I can't seem to locate anything about it in the rules...::rtm::

[Molten]

Please refer to Section 2: Field drawings
It does not explicitly define it, but you can derive it from the information given to you.

[Hallry]

Please refer to Section 2: Field drawings
It does not explicitly define it, but you can derive it from the information given to you.

By using a protractor on a print-out of the full field layout on page 5 of the 'Arena Layout and Markings' file, I found that the angle is 65 degrees.

[Hallry]

By using a protractor on a print-out of the full field layout on page 5 of the 'Arena Layout and Markings' file, I found that the angle is 65 degrees.

Actually, that may be a little off. The easiest thing to do would be to find the distance between the split and where the diagonals turn straight again. Using the drawings, I found that the diagonal distance should be about 56.2'', so just make a straight line from the split to where the tape becomes straight at the pegs. That should be about 60 degrees.

(Sorry for the double post, for some reason I couldn't edit my post above)