Log in

View Full Version : pic: 1529's 2011 chassis

Taylor
20-01-2011, 01:24
[cdm-description=photo]36120[/cdm-description]
Leav
20-01-2011, 01:29
That looks cool! I love the innovative use of COTS items to create something truly unique.

Have you given thought to mounting bumpers? I'm not sure what the rules are on partial vertical backing (i.e. having the top of the bumper backed while the lower part is not). If you are planning on hanging them from the C-base then i'd make sure they are not only legal, but strong enough to withsand impacts as well.
karomata
20-01-2011, 06:19
our team decided to use a 6-wheeled base that only uses 2 CIMs so that we can use the other 2 CIMs for the arm
wilsonmw04
20-01-2011, 06:46
That looks cool! I love the innovative use of COTS items to create something truly unique.

Have you given thought to mounting bumpers? I'm not sure what the rules are on partial vertical backing (i.e. having the top of the bumper backed while the lower part is not). If you are planning on hanging them from the C-base then i'd make sure they are not only legal, but strong enough to withsand impacts as well.

We have used the kitbot every year to hang our bumper. We always make sure that the rails are within a inch of the center line of the bumpers. We have zero problems with them.
JesseK
20-01-2011, 09:19
I like this frame for its ease in assembly -- it's an excellent way to not play to a team's weaknesses while also quickly producing something of good quality. Great job!
IndySam
20-01-2011, 09:23
I love it and am proud of our CAGE partners.

I would think twice about the alumilite belly pan. It's conductive and not as strong as you think.
JamesCH95
20-01-2011, 09:45
Slick!

I would also go with a non-conductive belly pan, plywood or plastic would be better IMHO.
Taylor
20-01-2011, 10:02
I love it and am proud of our CAGE partners.

I would think twice about the alumilite belly pan. It's conductive and not as strong as you think.

That's a great point. We're velcroing our components down so they won't be in contact with the conductive Al. We've done it in years past with good results.
As far as the strength of the material, we used it on our 2010 with no complaints.
johnnyburns35
20-01-2011, 13:36
I would love to do somthing along those lines but our team always goes for "SIMPLE" i guess it maybe because we dont have the man power to do it. :confused:
CMills
21-01-2011, 11:45
I would love to do somthing along those lines but our team always goes for "SIMPLE" i guess it maybe because we dont have the man power to do it. :confused:

This is relatively simple lol.