RS550 Test Videos

[klmx30302]

We just got around to testing out this today and i recorded the results. We hooked it up to a 64:1 transmission and attached a 40 lb load.
Here are the videos:
http://www.youtube.com/watch?v=RB92j2MO3Mk
http://www.youtube.com/watch?v=wuTjJUwgCmQ
http://www.youtube.com/watch?v=bFHZ3NVt18E
http://www.youtube.com/watch?v=Nr9U5ANoD-M

[ttldomination]

I'm going to guess that the weight is not being "let" down, but instead the motor is being powered off and the weight is falling down?

- Sunny

[LLogan]

What diameter is the spool you are using?

[klmx30302]

What diameter is the spool you are using?

I think it is 2 inches but I can let you know for sure tomorrow. Also the rope is kevlar, we used it on our winch last year. We could "almost" stop the backdriving when we took an alligator clip and clipped it from the positive to negative terminals on the motor, in a mentors words we were "putting on the brakes".

[klmx30302]

I'm going to guess that the weight is not being "let" down, but instead the motor is being powered off and the weight is falling down?

- Sunny

yes.

[klmx30302]

Ok so the spool has a diameter of 2".

[Spirator]

Thanks guys! This is useful for our design considerations.