Log in

View Full Version : Driving with tower

falconmaster
02-02-2011, 16:28
http://www.youtube.com/watch?feature=player_embedded&v=AsOqqhi-eGA
billbo911
02-02-2011, 16:34
We've had problems in the past with Wedge Top too. The solution we used was to insert #10 screws through the tread and into the wheel. Make sure the screw heads do not penetrate the tread or tear a larger hole and you should be good.
Chris is me
02-02-2011, 16:52
Drill and rivet each end of the tread to those Plaction wheels and you will have zero problems.
Bruceb
02-02-2011, 17:51
Are those this years plaction wheels with the wire conveyer belt connectors?
Bruce
thefro526
02-02-2011, 18:10
Drill and rivet each end of the tread to those Plaction wheels and you will have zero problems.

We also throw a rivet in approximately 180* from where the tread meets, just in case one of the retaining groves in the wheel gets damaged.
Siri
02-02-2011, 18:53
Nice test drive! We use the screw method with thread brass inserts for the plaction wheels. Works great and makes for an easy switch-out. Description (http://wiki.team1640.com/index.php?title=AMTreadMountsPage)