Log in

View Full Version : pic: Electrical hasn't gotten to the bridge yet so...

NetPlanet
07-02-2011, 21:42
[cdm-description=photo]36221[/cdm-description]
jsmith296
07-02-2011, 21:44
Wow, the chassis guy who built that robot must have really put in a lot of time and effort to build that robot for his programming team....

Well done unknown chassis captain..
MathFreak
07-02-2011, 22:09
Wow, the chassis guy who built that robot must have really put in a lot of time and effort to build that robot for his programming team....

Well done unknown chassis captain..

nice :/
it worked well...
but it had too much weight... 2 batteries is heavy!
MagiChau
07-02-2011, 22:12
Wait? Electrical isn't your programming team? Programming team spent all of today setting up the electrical for the 2011 bot instead of testing or doing programming. We still need to attach more wires for additional motors and other misc. stuff before plugging in camera, accelerometer, gyro, encoders etc.
MathFreak
07-02-2011, 22:31
Wait? Electrical isn't your programming team? Programming team spent all of today setting up the electrical for the 2011 bot instead of testing or doing programming. We still need to attach more wires for additional motors and other misc. stuff before plugging in camera, accelerometer, gyro, encoders etc.

It is.... there are 2 people (including me) who are actually working on programming and there is 1 mentor for programming and the 2 people is in electrical too
Al Skierkiewicz
08-02-2011, 01:11
Mike,
Before you take another picture, can you please insulate all the battery wiring terminals? The battery is capable of welding if a dropped tool falls across the bare metal. That dead short will get extremely hot, extremely fast and will damage the battery, possibly to the point of injuring someone. Inspectors are asked to stop any inspection until all terminals are insulated.
sanddrag
08-02-2011, 03:15
Inspectors are asked to stop any inspection until all terminals are insulated.Good. You wouldn't believe how many times in the past I'd find teams without insulated terminals. And at times, I thought I was the only inspector checking. I made teams show me all their batteries.
Al Skierkiewicz
08-02-2011, 07:42
Good. You wouldn't believe how many times in the past I'd find teams without insulated terminals. And at times, I thought I was the only inspector checking. I made teams show me all their batteries.

Please add "show me all your chargers" as well.
NetPlanet
09-02-2011, 21:33
Mike,
Before you take another picture, can you please insulate all the battery wiring terminals? The battery is capable of welding if a dropped tool falls across the bare metal. That dead short will get extremely hot, extremely fast and will damage the battery, possibly to the point of injuring someone. Inspectors are asked to stop any inspection until all terminals are insulated.
We use transparent shrink rap on the terminals so that we could easily inspect the connections. It's hard to see in the photo.
Al Skierkiewicz
09-02-2011, 22:18
We use transparent shrink rap on the terminals so that we could easily inspect the connections. It's hard to see in the photo.

Excellent!
RoboDawg
09-02-2011, 22:54
Nice! I thought we were the only team to use transparent heat shrink for the same reason! ( P.S. It also gives the inspectors something to catch until they see that it IS insulated.):p